SHEVRON Car Seat Covers – FITTING INSTRUCTIONS

All Car Seat Covers FITTING INSTRUCTIONS are described. If you have any special questions please contact us.

Front Car Seat Covers – Fitting Squab (Back Rest):

  • Remove headrest from seat.
  • Slide seatcover over top of seat.
  • Line up holes at the top of the seatcover with the holes where the headrests were removed from.
  • Fit headrest covers if supplied.
  • Re-fit headrest into holes to hold top of seat cover in position.
  • Slide the front and back of the seat cover firmly to the bottom of the squab.
  • When fitting covers with SIDE INTRUSION AIRBAGS ensure the airbag labels are on the outside of the seat and face the door.
  • Pull fabric firmly between back and base of the seat. (DO NOT PULL TIES, THEY ARE FOR SECURING ONLY.)
  • The seat cover seams must align with the seams on the seat as close as possible.
  • At the bottom of the rear of squab attach the securing straps together to hold the seat cover in place.

Front Car Seat Covers – Fitting Cushion (Base):

  • Slide the cover cushion onto the seat ensuring it is clear of buttons or levers
  • Position seatcover so that the border of the seat is evenly covered.
  • Push the rear flap through the seat to the back.
  • Push strap under between seat and the plastic surround at the base of the seat. (loosening of the surround maybe required and then
    re-tightened when seat cover is fitted)
  • Tuck the seatcover border under the plastic surround at the base of the seat for a better fit.
  • Attach the securing straps together under the seat to hold the cover in place. Ensure all straps are clear of tracks and fittings.
  • Seat covers will mould into the shape of the seat as the vehicle as the vehicle is used and straps may need retightening.

Car Seat Covers – MIDDLE FITTING INSTRUCTIONS

Middle Seat Cover – Fitting Squab (Back Rest):

  • Remove headrest from seat and fit headrest covers.
  • If able lift the cushion (base) seat.
  • Fold down any split section of the seat and fit the appropriate seat cover pieces. Ensure the seat cover is pulled down firmly and join the securing straps.
  • Return squab back into location and replace headrests.

Middle SeatCover – Fitting Cushion (Base):

  • Fit the seat cover cushion onto the seat. Ensure the cover is pulled down firmly and join the securing straps.
  • Replace the base back into its location ensuring that the seat belts are in their correct position.

SHEVRON REAR Car Seat Covers – FITTING INSTRUCTIONS

  • Remove headrest from seat and fit headrest covers.
  • Lift, unlock, or unscrew the cushion of the seat for easier fitting and remove the seat.
  • Lift, unlock, or unscrew the squab of the seat for easier fitting and remove the seat.
  • Fit the seat cover squab onto the seat. Ensure the seatcover is pulled down firmly and join the securing straps.
  • Fit the seat cover cushion onto the seat. Ensure the seatcover is pulled down firmly and join the securing straps.
  • Return squab back into location ensuring the seat belts are in their correct position and replace headrests.
  • Replace the base back into its location ensuring that the seat belts are in their correct position.

Rear Cover – Fabrics

see above

Truck Car Seat Covers

Check our catalogue below for front, middle or rear seat cover or contact us for special inquiries

Please contact us for further new model information or have a look through our Full Seat Cover Catalogue or check in wikipedia you car model.

Check also our other automotive products like WindowSOX , Dash Mate or Boot Mate.

Please select carefully the available colour/pattern out of the catalogue for your cover or contact us before you start ordering the seat cover for your SUV, truck or ute.

To Read more about Car Seat Covers